1990 - 1999 Chevy Suburban and Tahoe

Installation instructions for Block kit SRG19095 and SRG19699

1990-1995 and 1996-1999 Suburbans and Tahoes

CAUTION: Refrigerant under high pressure. Be sure to evacuate the system before servicing.

1. Unhook aluminum lines going to the rear evaporator, located under the hood on the passenger side fender well.

99 suburban location

2. Remove original orings from the original fittings

Block fitting connection

3. Replace with new lubricated o-rings and install supplied fittings.

4. Torque to 20 in. lbs

NOTE: Recharge system using approximately 1 lb. LESS than original factory specs then adjust accordingly.

There are no products to list in this category.